Multi-Head Round Tube Polishing Machine

The use of multi-head round tube polishing machine

Mainly used in hardware, electroplating, vehicle accessories, steel and wood furniture, standard parts and other manufacturing industries. It is the preferred choice for polishing round tubes, round rods, and slender shafts.

Main feature

Suitable for polishing workpieces of different sizes and diameters.

Scope of application

Electroplating, hardware, mold processing, gas spring rods, hydraulic fittings, copper tubes, copper rods, steel pipes and iron rods, stainless steel pipes, aluminum pipes, handicraft processing, steel and wood furniture, rods, pipe fittings, outer surface polishing, suitable for lathes Fine polishing of the workpiece after machining.

Working Principle of Machine Tools

The grinding wheel (1000 impellers/polishing wheels) is used as the grinding tool, and the typical cylindrical grinding technology is adopted. The grinding wheel (1000 impellers/polishing wheels) can be roughly grinded, silently or polished by its material, granularity, hardness and contact mode. Multi-head linkage can double the processing efficiency.As long as the machine features: the speed of different wheels can be adjusted, it is suitable for polishing of workpieces of different sizes and diameters.

Transportation and lnstallation of Machine Tools

1. In transportation, it is necessary to tie firmly. When hoisting,it is necessary to use steel wire to pass through the bottom of the machine.The diameter of the steel wire is not less than 15 mm. It is necessary to keep balance and not to tilt.When loading and unloading forklift trucks, it is necessary to select the position of the center of gravity to prevent tilting.

2.When installing, the foundation should be balanced, the bottom should be all landed, and the machine should be kept level.When necessary, the ground silk should be struck.

3.When the machine is not in use for a long time, it should coat the swallow tail sliding surface with rust-proof oil, and pay attention to dust-proof and moisture-proof.

4.When equipped with an environmental protection cover, the equipment needs to be cleaned regularly, including lubricating oil: the dust in the motor is easy to enter and needs to be cleaned regularly, so that the life of the equipment will be greatly increased and unnecessary damage will be avoided.