Inverter

Product application

Widely used in home appliances, vehicles, field work, industry, office, tourism, etc.
Both inductive and resistive loads can be used.

Feature:

1.Comprehensive protection function, using intelligent protection chip, do not hurt the battery electrical appliances, so that the electrical appliances stable and safe use.

2.Reverse connection protection, automatic protection when the connection is reversed

3.Overload protection, over the rated power automatically power off

4.High temperature protection, protection when the temperature is too high

5.Short circuit protection, automatic protection when short circuit

6.Shutdown recovery, voltage back to normal range

7.Undervoltage protection, automatic power off when the voltage is too low

8.Over-voltage protection, over-voltage automatic protection

9.Shock protection, protect the appliance when the shock is large

10.Electric shock protection, jack built-in protection

Direct connection to the battery

Use the standard battery clip line of the product to directly connect the positive and negative poles of the battery.

Compatible with most devices on the market.
Note: Different power appliances need different power inverters, if you don't know how to choose, please contact us!

Product display

About Products

Q1、What is peak power? What is rated power?

A:Peak power is the power that the power inverter can withstand at the moment of power on, usually refers to the motor type of load.

When starting due to the high starting current and the instantaneous starting power.

Rated power refers to the power that the power inverter can work continuously under normal conditions.

Q2、What is resistive load appliance?

A:Generally through the resistive components to work purely resistive load is called resistive load, such as: cell phones, computers, LCD TVs, incandescent lamps, electric fans, electric mahjong machines, audio and video players, small printers, water dispensers, rice cookers and other appliances are resistive load, because the range is too wide, not to point out one by one.

Q3、What is inductive load electrical appliances?

A:Refers to the application of electromagnetic induction principle of high-power electrical products, such as motors, compressors, relays, fluorescent lamps and so on, the power of these products in the startup far more than the rated power (about 3-7 times). For example, a refrigerator that consumes about 150 watts of power in normal operation, its start-up power can be as high as 1000 watts or more.

Q4、Can the correction wave inverter take inductive load appliances?

A:Inductive loads are not necessarily impossible to use on the inverter of correction wave, such as electric fans, small power motors, hand drills, hair dryers, etc. can be started normally, but there may be some noise and interference during use. Energy-saving lamps, air conditioners, refrigerators, induction cookers, microwave ovens, compressors, water pumps and other equipment can not be used in the modified sine wave inverter.

Q5、How long can the inverter work?

A:The battery voltage must match the inverter (such as 12V battery must choose 12V inverter) lead-acid storage battery, maintenance-free battery, car / electric car battery can be used, can not use lithium batteries. How much power you can carry depends on the power available from the battery and the continuous power of the inverter, and how long it can be used depends on your battery capacity.

Battery capacity.

Time = voltage of battery X capacity of battery X 0.9 + total power of appliances

This is calculated according to the theory, the battery state required in a fully charged, new battery is the case (the above theory is for reference only)