1.Put the raw materials into the pulper and add an appropriate amount of water to stir the waste paper into pulp. 2.The forming system is the process to produce the wet egg tray by forming machine. When the above forming moulds sink into the pulp tank, the negative-pressure vacuum pump will work on the the back of the forming mould, the pulp will be sucked and gathered on the mould surface to form the wet egg tray. 3.Then the wet trays are ready for sending to the metal dryer for drying.The metal dryer is six-layer.It occupies a small area; It saves about 30% energy than brick dryer.It can be designed to multi layer according to your requirements.

Centrifugal oil filter is the principle of using the centrifugal principle to achieve the separation of different substances when the motor rotates at high speed. When the centrifugal oil filter is filtering, the filter residue will adhere to the wall of the inner cylinder, and the oil is in the innermost layer. When the motor stops running, the oil will flow out first.

The bagging machine is a fast filling machine such as the on-site granary of the sand factory. The machine adopts a large-capacity hopper, which can hold two cubic meters of sand at a time; the hopper is added on three sides, and the other side is convenient for forklift loading; in order to prevent the material from being unloaded hollowly, a silo wall vibrator is installed on the silo wall to assist in discharging , labor saving and high efficiency. The bagging machine is a fast filling machine, such as the granary sand factory site. It is mainly used for automatic quantitative packaging of sand and gravel.

The process flow of the feed pellet production line is roughly the steps of raw material receiving, primary cleaning, crushing, mixing, granulation, cooling and screening, and packaging.

Silage can reduce the loss of nutrients and improve feed utilization. Generally, the nutrient loss of sun-cured hay is 20%-30%, sometimes as much as 40%, while the nutrient loss after silage is only 3%-10%, especially vitamins can be effectively preserved. In addition, through silage, many parasites (such as corn borers, core borers) and harmful bacteria carried by raw materials can also be eliminated. According to measurements, on the same unit area of arable land, the nutritional value of the whole plant corn silage produced is 30% to 50% higher than the nutritional value of the produced corn kernels plus dry corn stalks.

This machine can crush corn, soybeans, bean cakes, straw, straw, peanut seedlings, sweet potato seedlings, etc. The inside of the machine is a hammer-type crushing bin, which can process straw, straw, and soybean seedlings into roughage, and can also process grain It can be processed into concentrated feed, and the raw materials after the pulverizer can be processed into pellet feed for livestock and poultry. This machine can also be replaced with different crushing screens according to the different crushed materials of the user, and the Shacron dust removal device can be selected according to the requirements. Manually, only need to put the collecting belt at the discharge port of the Shacron, and the materials can pass through the Shacron. Long discharge, convenient and labor-saving.

The twin-shaft shredder shreds various soft and hard materials by using two sets of cutter discs composed of high-grade alloy steel. Mainly shreds plastic packaging drums, rubber tires, basket materials, large rolls of films, and large bundles of agricultural films. Plastic mulch film, large bale of plastic film, large bale of woven bag, roll film, paper, fiber, wood, etc. This machine has the characteristics of large output, low energy consumption, low noise, low dust, etc., so it is widely used in coarse and medium crushing operations such as solid waste, plastics, waste household appliances, paper, leather, wood, rubber and so on.

The color sorter is a new type of multi-purpose color sorter developed, produced and successfully introduced to the market by the color sorter industry for many years. It mainly provides a series of color sorting work of miscellaneous grain agricultural products such as soybean, corn, broad bean, peanut, coffee bean, pepper, chickpea and so on. Compared with manual selection, labor saving, time saving, high efficiency and low processing cost. Improve the quality and economic and social benefits of the selected products.

KL-20 Complete Set Combined Rice Mill combined with drum paddy cleaner and de-stoner, 8’’ rubber roller husker, gravity paddy separator, large volume inhale-air emery roller rice mill, rice grader, conveyors. Revolutionally equipped with drum type cleaning machine which engifted very strong cleaning efficiency, great brown rice separating and rice whitening performance, easy operation, convenient maintenance and high productivity, reducing the leftovers at the maximum level; with direct optional brown rice outlet, provides users with a flexible multifunctional rice milling solution. At the meantime, we reserved the possibility to match the follow up equipment such as multi-layer rice grader, rice polisher, color sorter etc, to improve the milling performance or extending its functions.

This model is a special small-scale equipment for paddy-processing. It is composed of feeding hopper, husker, brown rice and chaff separator, milling and blower, etc. It processes from paddy cleaning, husking, air-blowing selection to milling in a row. The brans, chaffs, blighted grains and white rice will be selected out from different outlets separately. This machine has been designed by proper layout, compact structure, reliable lightened main body. Thanks to the design, the rice mill features with low noise, easy operation, low power consumption and high productivity but with less chaff containing and less broken rice. It is an ideal machine for the countryside rice milling.